RE: Reference file path broken
Couple of questions: 1. What version of MicroStation were you previously running with GEOPAK before you moved to PowerGEOPAK? 2. Are you working with ProjectWise? Version? 3. Can you explain and/or...
View ArticleRE: Import GSF to Openroads
I am afraid that is not possible. The gsf format is not readable but you can, as you know, export tins from the site model.communities.bentley.com/.../14184.video-import-asc-dem-files-to-stm-tm-and-tin
View Article[OR] Setting up Standards - Linked Native, Element Templates, Features, Etc....
We need a simplified, step by step explanation of how to setup some basic elements that make up the DGNLIB's needed to implement Open Roads.Please don't tell me to look at the sample workspaces. I...
View ArticleRE: Storm & Sanitary: Display different pipes in different levels
Exactly what I was looking for - thank you! :-) I got a follow-up question when it comes to styles. Is it possible for me only to show the center line as it is without styles?
View ArticleRE: [OR] Attachment to 3D model offsets greyed out
Now I just noticed that when I move the cursor over the move reference button, it says it is a locked reference. I move the cursor over the header, right-click to add "Application Lock" then notice...
View Article[OR] Attachment to 3D model offsets greyed out
Primary problem: My corridor element is out in la-la land, translated 2,147,483.647 feet in both northing and easting. I have no idea where this originally came from; it wasn't a number I ever entered...
View ArticleRE: Station/Offset/Elevation Report for Template Point in OpenRoads
Okay, I found the solution. That's what always happens. Spend a whole day trying to figure it out. Next morning you come in and ask the community and then you find it yourself 30 minutes later. The...
View ArticleRE: Station/Offset/Elevation Report for Template Point in OpenRoads
It sounds off topic, but I'm not sure that it is. If you're running Geopak .872, is this corridor derived from an alignment that has a profile that starts someplace other than at the very beginning of...
View ArticleRE: Station/Offset/Elevation Report for Template Point in OpenRoads
I'm running GEOPAK .789. The corridor is indeed derived from an alignment that the profile does not start at the very beginning, but the stations it's giving me are not rendered points. The template...
View ArticleRE: Station/Offset/Elevation Report for Template Point in OpenRoads
Okay, not quite there but almost there. Using the Station Base Report tool it gives me the stations along the Main Lane, which I want, it gives me the offset to the DITCH_CEN_RT, which I want ... but...
View ArticleStation/Offset/Elevation Report for Template Point in OpenRoads
I'm trying to create a report that gives me the Offset/Elevation of a template point at a set interval based off the stationing of the Main alignment.Example:I have a DITCH_CEN_LT point that defines...
View ArticleRE: Storm & Sanitary: Display different pipes in different levels
You can define styles in the i_structures.dat file. The files is a simple ASCII file. What I did when adding styles to my version, was to add at least one style to every material and type. Then I...
View ArticleRE: Clip mesh to terrain model
Hello David, Could you let us know about the software you are using so that we can test your provided .dgn file at our end. Regards, Purva Lakde
View ArticleClip mesh to terrain model
Is it possible to clip a mesh (representing excavation for a bridge pier) to the existing ground surface (terrain) or...
View ArticleRE: Volume from mesh
Essentially, you want the intersection of the meshes. You may try duplicating the edge of the excavation mesh to get a curve that you can use to trim the exterior of the grade surface, then stitch the...
View ArticleRE: Volume from mesh
I figured out how to calculate the volume. I had to use Geopak tools. I made a terrain model from the excavation limits and used the "Analyze Volumes" tool to figure the difference between the two...
View ArticleRE: Volume from mesh
[quote user="David S"]I had to use Geopak tools. How to I trim the excavation mesh to the triangle surface?[/quote]This is the wrong place to ask that question. You'll receive a more enthusiastic...
View ArticleVolume from mesh
I'm trying to figure the volume between two meshes (excavation for bridge pier). I've created one mesh for the excavation limits which extends (upward) to the existing ground surface (meeting the...
View ArticleRE: Clip mesh to terrain model
I'm using Power Geopak V8i SELECTseries 4 version 08.11.09.851The survey file was too big to upload. I tried to upload only the triangle file but it's too large also. Can I email you the file or get...
View Article