Quantcast
Channel: OpenRoads | OpenSite Forum - Recent Threads
Browsing all 15087 articles
Browse latest View live
↧

RE: Clip mesh to terrain model

I presume you mean 23.6 MB :-) Could you create a clipped terrain around the 3D excavation area, in a separate file, and post that?

View Article


RE: Clip mesh to terrain model

(Please visit the site to view this file)You're correct.  I've attached a clipped terrain file.

View Article


RE: Feature definitions from .xin not carrying symbology through to dgn

Hello Matthew, I believe this is happening because the .xin file is not set to load automatically in the test.dgn lib file. Reopen the test.dgnlib and in Inroads Explorer go to file - project defaults....

View Article

Feature definitions from .xin not carrying symbology through to dgn

Hi.I am working on PowerCivil SS4, with limited to fair previous SS2 InRoads experience. I am hitting a wall when it comes to symbologies and plan production. I have spent some time working through the...

View Article

RE: Does SS2 Storm and Sanitary have the ability to model Tidal Flow and...

With regards to flap gates and tidal gates, I find that they do not seem to work. Is this a glitch in CivilStorm SELECT 2? However, I find that modeling ponds with 'forward' flow only does work to...

View Article


Does SS2 Storm and Sanitary have the ability to model Tidal Flow and Check...

I am working on a project that modeling of Tidal outfalls and check valves be necessary. Does Storm and sanitary do this? Is there another Bentley program that will?Thank you

View Article

OpenRoads ConceptStation

Using the trial version of ConceptStation and I haven't been able to find any way of adding or subtracting lanes.  You are able to switch templates along an alignment but you aren't able to modify the...

View Article

RE: [InRoads SS4] Survey Points

This issue was finished via a phone call but for anyone else having a similar issue. The magenta X's showing were a cell set in the symbology. The cell had it's linestyle set to "bylevel" and the level...

View Article


Image may be NSFW.
Clik here to view.

[InRoads SS4] Survey Points

Ok, I have tried just about everything I know to change the size of the big magenta X's in the picture below.On the left side of the pic is the problem point and on the right side of the pic is a point...

View Article


RE: OpenRoads Cross Section Reference Border/Elevation Numbers Help

Sure you can go ahead and send me the file and I'll attach it to the defect.

View Article

OpenRoads Cross Section Reference Border/Elevation Numbers Help

I am using Microstation V8i v8.11.9.655 and I have a quick question about referencing a border into the generation of cross sections. I am able to get the border in there (including major and minor...

View Article

Select Text with rotation

Hello, I want to select a lot of text with text rotation. There are many text in my file. Their rotation is 0 degree, or 270 degree or 88 degree.I want to select only 270 degrees text. How can I do...

View Article

RE: Feature definitions from .xin not carrying symbology through to dgn

Hi Jason Thanks a lot, that did sort out the issue of the symbologies not being translated through from the dgnlib file. The symbologies work nicely when I pick an element in plan and change the...

View Article


RE: [OR] Setting up Standards - Linked Native, Element Templates, Features,...

Most of the OpenRoads courses I have seen on the LEARN server have a downloadable PDF of the course content. For example, there is a course "Quickstart for Surveyors using OpenRoads". It may not be a...

View Article

RE: [OR] Setting up Standards - Linked Native, Element Templates, Features,...

There is apparently a lot more to moving to Open Roads than linking XIN files and importing Components that were exported from an XIN. The issue is that the average user only needs to know how to...

View Article


[OR] Setting up Standards - Linked Native, Element Templates, Features, Etc....

We need a simplified, step by step explanation of how to setup some basic elements that make up the DGNLIB's needed to implement Open Roads.Please don't tell me to look at the sample workspaces. I...

View Article

RE: Clip mesh to terrain model

DavidI am using the OpenRoads tools in PowerCivil 8.11.9.845 - which are the same as you have in GEOPAK (and MX, which I normally use).Anyway, the attached PDF is how I calculated the cut volume (at...

View Article


RE: import alignment with a shift

There is a known defect that has been logged for this issue. I would like to attach your situation to the defect as well. Please forward your dataset, gpk and dgn, to me. You can attach it here under...

View Article

RE: import alignment with a shift

Beebe,Here is a copy of my dgn and gpk. The name of the alignment that I was unsuccessful in importing is named 35WSB. I wasn't sure what you meant by dataset, so if you need additional information...

View Article

import alignment with a shift

The latest issue I am having with OpenRoads stems from the way it is importing alignment information from a gpk. I am trying to import an alignment that has a "shift" which is a traditional geopak cogo...

View Article
Browsing all 15087 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>