Cross sections
Hi allIm creating cross sections and annotating them using the new PowerCivil (08.11.09.845) cross section commands. I have created my cross sections. The tool saves them in a new wizard and groups...
View ArticleClik here to view.
RE: [OR/IR Ss4] Drafting Notes - Plan Note not honoring {VERTICAL_ELEVATION}...
{VERTICAL_ELEVATION} gives the elevation of the active vertical at the station you select along the horizontal. Make sure your Placement Mode is set to Element, then when it prompts you to Identify...
View Article[OR/IR Ss4] Drafting Notes - Plan Note not honoring {VERTICAL_ELEVATION}...
When I tried to place a drafting note using the subject settings, the result is only placing a note with the raw text and not evaluating the appropriate value.Is this a known defect?
View ArticleRE: Complex Terrain Model Boundary
Ben have you seen this wiki?communities.bentley.com/.../27492.video-create-terrain-model-from-corridor-with-exterior-boundary
View ArticleRE: Inroads does not honor assigned line styles for drainage structures
Turn on Style Lock. When off, the styles can be defined in the View Drainage dialog box and saved in a Preference. When on, the Styles saved in the SDB are used. Also, you can assign styles in the...
View ArticleInroads does not honor assigned line styles for drainage structures
This question is with reference to the article on the same topic at...
View ArticleRE: Complex Terrain Model Boundary
Yes, I have seen that video. Unfortunately, it is rather cumbersome to switch back and forth between design stages when you have lots of corridors. My method of setting the boundary with the corridor...
View ArticleRE: Complex Terrain Model Boundary
ok. thanks for clarifying. I understand the issue. would you mind providing your dataset? I would be happy to file an enhancement request for you. communities.bentley.com/.../124171
View ArticleComplex Terrain Model Boundary
I am modeling a series of complex and detailed urban roadway corridors and intend to assemble the various terrain models generated into various complex terrain models. Because I am modeling this...
View ArticleTrailing circles and ghost like menu
I have a computer that is running InRoad 08.11.09.722 and 08.11.07.619, GeoPAK 08.11.07.619 and Microstaion 08.11.09.829 (After reinstallation, was on 08.11.09.742 when issue first occured).While the...
View ArticleRoads and Maritime Services NSW Australia - Surveying resources
There are a few draft documents available on the Roads and Maritime Services website. (These documents will eventually be relocated into appropriate long term locations)...
View ArticleRE: [CR OR] Add the Select Station Graphically Button to the Cross Section...
You can access that from context menu (click in CS view) and chose Location from Data Point. However I agree it would be nice to have localize button wherever approperiate.
View Article[CR OR] Add the Select Station Graphically Button to the Cross Section View...
It would be really convenient if the Cross Section View Border tools included the Select Station Graphically button.
View ArticleRE: Display of right of way in Mx-Roads cross sections
Hello Chetan, Could you please elaborate in more detail about the display of existing Row and proposed Row, how and where would you like to display in MXRoad ? If you would like to display in plan...
View ArticleRE: Display of right of way in Mx-Roads cross sections
Sorry i want to display in the cross sections
View ArticleRE: Display of right of way in Mx-Roads cross sections
Hello Chetan, Please refer the below link for your reference. I know they have used Open Roads Technology but you can export to MXRoad and then import inside MXRoad....
View ArticleDisplay of right of way in Mx-Roads cross sections
Can any one tell how to display the existing RoW, and Proposed Row.
View ArticleRE: OR set corridor limits for processing
We have had the same thoughts for some time now. In fact, I think we filed an enhancement request for this functionality. Hoping to see it in Connect.
View ArticleOR set corridor limits for processing
In InRoads V8.7 to SS2 there was an option to set corridor limits from station to station. That was very usefull when working in details on small section of corridor. It saved a lot of time then....
View ArticleCut-Fill Volume using MX Road for any Non-Road Portion?
Hello Sir/ Madam,I have two different elevation files (.pnt format) from Total Station. I want to calculate Cut/ Fill Volumes for the same which is not a Road Portion. Is it possible to do with help of...
View Article