Annotate Cross Section - How to Keep you "Crossing Feature" Selection Set
So when using the Annotate Cross Section tool, we typically load our preferences and then data point the points we want to annotate which in return creates a selection set of all the points you/I...
View ArticleOpenRoads Export to native - manual method does not work
If the setting for export to native is set to manual, things are still exported automatically when the feature definition is set to auto export. Thus, no matter what this setting is defined as, the...
View ArticleRE: Inroads Storm and Sanitary - HGL/EGL not plotting
I think I found it. The problem appears to be with locations where I have 2 inlets located in a sump. One of these inlet is a backup for clogging, so I am only assigning flow to one of the inlets for...
View ArticleInroads Storm and Sanitary - HGL/EGL not plotting
Any reason why my HGL EGL lines plot in some profiles but not other? The lines are plotting for the main trunkline, but they are hit or miss with any of the branch lines. The design log shows that the...
View ArticleRE: Merging tin files if one is in surface and the other in grid
Found it, worked like a champ. Thank you...
View ArticleMerging tin files if one is in surface and the other in grid
Is there an easy way to convert a tin file to surface in geopak without having to manually change the dat file?
View ArticleRE: Profile Run with Subsurface Utilities
(Please visit the site to view this file)I've tried on a few other smaller projects and it does the same thing. It crashes when I "reset" to quick picking. I will attach my dgn file. It will only...
View ArticleRE: Profile Run with Subsurface Utilities
Hi Justin: Are you using laterals in your drainage network? And if so, are you trying to include a lateral in the profile run? Trying to add a lateral to a profile run will crash every time.
View ArticleClik here to view.
RE: Cannot get template drop to map to end of corridor in a linear template
Holly,I did try another linear template, to the same effect.Attached is the dgnlib I'm working out of and the associated itl.The element in question can be found by expanding the Civil Objects group...
View ArticleRE: [OR] TR? Traditional Tentative Snap Not Working as it Always Has
I'm not sure I can share files. But in the link to the other thread, is a post stating that in 878. they are still seeing this issue.
View ArticleRE: [OR] TR? Traditional Tentative Snap Not Working as it Always Has
I can say this is 100% true. In straight up Microstation, if you had several elements on top of or close to each other, you could tentative snap and if you got the wrong one you could tentative snap...
View ArticleRE: [OR] Bug: Replace Reference, when requiring a selection of the parent...
I have seen the same behavior Derek. The command should work as I am simply selecting one type of geometry but I get the same "Invalid Geometry Type". I have even turned off everything else in the file...
View ArticleRE: Negative chainage
Yes, this is possible. Using the OpenRoads Start Station command, the prompt sequence is:Pick the alignment.Set a position along the alignment where you wish to define a definite station value. You...
View ArticleNegative chainage
Hi. I want to start my chainage on a negative stakevalue, i.e. the chain must start at -300.00, go to 0.00, and proceed to +500.00. Is this possible in GEOPAK with Openroads, and how?ThanxChris
View ArticleRE: Cannot get template drop to map to end of corridor in a linear template
Hi Joel, You template is going from the start to end of your line. All corridors and templates display this way. It may appear more exaggerated on your line since it is just over 5 feet (or whatever...
View ArticleRE: Profile Run with Subsurface Utilities
No, I am not. All of my drainage pipes are conduit. I've also tried to perform this task on other computers with the same result.
View ArticleRE: Convert mesh to surface
I would suggest you use the Civil Terrain Model tool, Create Terrain From Elements, this will give you a Civil Terrain that you can use with OpenRoads tools. communities.bentley.com/.../353824 The tool...
View ArticleConvert mesh to surface
I am trying to convert a mesh into surface with power inroads and I am getting this error " element not valid for tool" and I don't know why since my element is a mesh....On the convert mesh to surface...
View ArticleRE: OpenRoads geometry toggle degree of curve broken
Hi Robert, When you key-in d1 for your Radius Value, do you then strike the Tab key? Thanks, Sanders
View ArticleClik here to view.
RE: Cannot get template drop to map to end of corridor in a linear template
Well, the corridor certainly extends to the ends of the reference line. The template drop, however, terminates 0.033 feet short at both ends (give or take).The problem with the shorter template drop,...
View Article