I moved the profile named boundary in my container model with the "Adjust profile named boundary" tool.
When I go to my sheet drawing model and reannotate the profile the grid annotation doesn't update.
Is there a trick to get the file to recognize the new profile boundary and vertical alignment location?
Currently I am able to attach the Bing Maps background to my file . The issue is I want to be able to clip, edit (contrast and brightness), and ultimately print the background map with my design overlayed. Is there a way to clip the bing maps, or perhaps easily import it as a raster image?
I have read all similar posts. As near as I can tell, I have my setting correct. My template uses all of these Feature definitions. Yet, I have run the subject command multiple times and I only get the RD-TL and RD-EOP Features. No Curb features (RD-Curb...), no Sidewalk (RD-SDWK)
Can anyone explain why certain Feature Definitions work and others do not?
We have created new project work areas and are only able to navigate to them in Geopak by updating hte user preferences. Some users however, it will not read the updated paths and when we try to navigate to the project manually, not all of our ProjectWise projects are visible.
Hello
I work in a private consulting engineering company.
On a daily basis I make 2d and 3d projekt in microstation and Inroads.
I just had a two day course in Openroads, and in the future we will be using only Openroads to do all 2d and 3d projects.
Right now I have license for both microstation SS2, Inroads and Openroads doing the transition phase to only working with Openroads.
We would like to have the acces to all the above mentioned programs in 2021 until we feel completely confidence with only using Openroads.
We are going to update SS2 to microstation SS10 next week.
And my wish is to keep acces to SS10, Inroads and Openroads throughout 2021.
But is this possible?
I have heard that SS10 and Inroads will be phased out in the beginning of 2021, is it true?
Or is it only the support that will end?
Greetings Mia
I want use the" AASHTO 2001 emax6 Dual metric.srl" file to do superelevation, but the design speed for superelevation can not display for choose below 50 km/h, 
but the file list all the speed, does any body know how to show the 40km/h speed for use?
if i change to "AASHTO 2001 emax4 metric.srl", the 40km/h speed is display for choose.
how should i create raw file for terrain purpose. i have acsii file of spot levels, which will not be enough for drawing horizontal alignment. i need a xref to draw my alignment . what should i do??
Hi,
I'm using Element Annotation to annotate the plan view, using Feature Definition.
As I understand, the plan view is created from the 3D model and only the top lines are shown (i.e- if I have two feature point at the same vertical line designed in the template, only the top one will be shown).
For my question- I have U Shape concrete ditch, and on plan view only the finish grade is shown. But I want to annotate the bottom of the ditch and to have the invert level along the element.
The Element Annotation is available only for features that are on the plan although they are in the 3D model , is there a way to annotate the bottom of the ditch? or annotate every other feature which is not on the plan.
Thank you!
When using any of the Civil Platform products, the Toggle AccuDraw Button should be replaced with a 3 Way button that cycles through the three options from the subject of this post: AccuDraw | Civil AccuDraw | No AccuDraw (or AccuDraw Off) to make it impossible to activate both Civil AccuDraw and AccuDraw at the same time. Even with all the warnings, I discovered a process today that resulted in both operating at the same time and creating a number of problems.
We have a VBA tool that when using one of its options, it tries to turn on AccuDraw as its interface fits well with the workflow of the tool. However, an my PC, it failed to run as expected. It turns out, that I had enabled Civil accuDraw and when this tool tried to activate AccuDraw, the conflict resulted in an error loop in the code causing it to fail. I ended wasting a couple of hours trying to determine what was causing the problem and why only on my PC.
Also, the Civil AccuDraw icon is used for two tools - one to open its toolbar and the other to turn it off and on. The icons should be visually different. and the one that opens the toolbar should probably be a toggle that opens and closes the toolbar. And when the tool bar is closed, there should be a setting that users can select to turn of Civil AccuDraw when closing the toolbar, if they desire that behavior.
I have a 3SM reality model created with Context Capture and have created a section with the Section tools. My plan was to use the section tools better define the flowline of the curbs with breaklines but the Section graphics are interpolating so badly that the curbs are being interpolated over and not showing where the flowline is. Is there some kind of resolution setting that I'm missing? The tool is pretty much useless for me with the way it's acting so I'm looking for some input here. I'm using ORD CONNECT version 10.09.00.91
Here is what I see in all 3 views. Notice in the Section view the curb is not defined at all.
Here is a close up of the Iso view with a little more rotation where you can see that there is a defined curve in the model and the section line is interpolating over it.
Dear All,
Can any one suggest how to check visibility in long section i.e. profile view in ORD software, for your reference i am attaching image below
Regards
Deval
Hi everybody!
Is it possible to display layer description when hoovering with the mouse cursor over an element? If so, I assume there might be a setting somewhere to change this.
Much appresh!
//Kristoffer
Good day
We need to annotate our long section horizontal and vertical curves in the diagram with straight lines and not the curve as per Bentley Annotation.
Would appreciate it if some can assist us.
Good day,
I would like to find out if it is possible to customise the Profile Annotation Group to change the way ORD generates the tabular data for the horistonal and vertical data. I am specifically pointing to the way it generates the graphical lines. Currently ORD generates horisontal and vertical curves as "graphical curved lines" whereas our preferences are straight lines with dimension arrows (see attached image below).
From a high level observation it looks like these graphical lines has been setup in the "background" of ORD and can't be manipulated(?).
I hope this observation is incorrect and there is a way to manipulate these graphical lines.
I would really appreciate any help.
Many thanks and kind regards,
Christiaan
Hi All,
I want to extract the Design Chainages of Master center line based on coordinates at structure (Culverts, Major bridge, Underpass etc.) locations . Kindly let me know the procedure and share reference input available if any at the earliest please.
Thanks in Advance
Regards
Hari Krishna Palla
I am trying to work through what appears to be a bug in the Sheet Index. I set up the index with various folders so I could have series of sheet numbers such as C1.x, C2.x, etc. as shown in this screen shot.
This method works well for sheet numbering and I thought it would be a good way of tracking "sheet #" of "total sheets". The problem I'm having is that the sequence number of the models do not seem to be updating so the "sheet #" isn't updating correctly when I add or remove sheets. For instance, the sheet index shows sheet C3.1 to have a sequence number of "5". The "Place Sheet Index as Table" tool also shows a sequence number of "5" for the same sheet.
But the "Sheet #" on the actual page shows an incorrect sequence number of "3".
I did notice that even though the sheet index shows a sequence number of "5" the model properties show a sequence number of "3".
Is there a way to update the Model sequence number so it matches the sheet index sequence number?
I may be missing something, but it doesn't appear there's a Replace Reference rule for vertical geometry like there is for horizontal geometry. I frequently use the Tangent Profile Line From Element tool and am unable to replace the parent/reference element which leads to me having to delete and reestablish that particular element as well as those adjacent to it. I'd be shocked if this functionality doesn't exist and was wondering if someone can point me in the right direction. Any help is much appreciated. Thanks
The ORD version upgrade option Video talks about a utility program called versionchecker.exe
But this file could not be found in the program folders mentioned in the video. a query about the same in the help also did not get any results.
Any help/clarification is appreciated.
Thomas Antony
ALA Engineering
I am using ORD to create cross sections from a terrain model and template that I created. When I create the sheet set from named boundaries, the grid and annotation don't show up on the sheet. Also, the section label is off to the left of the page layout. What could be some things to check to make this work.
communities.bentley.com/.../_5F00_XS-Start-Sheets108_2D00_10_2B00_00.00-_5B00_Sheet_5D002D00_000.pdf