Good day
Need to add two different station / Chainage values on profiles.
Unable to find a option to add Row definition to set up a point targeting a station on a different profile.
Projecting a second alignment onto the profile do not allow a point definition to target a point on a profile, already added in the active profile.
Hello, I am using PowerGEOPAK SS4 and my dgn file has about 15 models so it takes forever to close a file (at least 5-10 minutes) because of the Status "Scanning Model: x" dialogue box that goes through every single model.
Does anyone have the same issue/ any workarounds?
Thanks!
Samy
I have created the Workspace for my Company in ORD connect edition, but it is not showing in the ORD explorer in the right side (Openroads Standards) in Libraries, DGN and feature symbologies. Please see below snap shots.Can Any one has idea why it is not showing?
have created the Workspace for my Company in ORD connect edition, but features and symbologies are not showing in the ORD explorer in the right side (Openroads Standards) in Libraries, DGN and feature symbologies. Please see below snap shots.Can Any one has idea why it is not showing?
I just Downloaded Open Roads, I have some sheets that were done in Micro station V8i Select Series 4 and when I open them in Open Roads Designer Connect Edition it states that V8I Select Series 4 is not supported in Open Roads Designer its read only open as read only.
And when I do a save as its still read only
Is there something that I need to download 
I am currently working on a large interchange project and am experiencing some weird results when generating plan named boundaries for a self intersecting alignment (e.g. cloverleaf). The left alignment in the image below is the subject geometry. I'm using a client supplied template and don't really understand if this is a defect in the OpenRoads platform or an issue with the way the geometry for the alignment was constructed. Seed scale and overlap settings make little difference. The named boundary element placement goes out of whack at the point of self-intersection and does not follow the stationing sequence. I am a new user to OpenRoads, but have a heavy background in Civil3D. Any assist that can be provided to troubleshoot this would be greatly appreciated.
I'm running Release 1, Update 7 - Ver. 10.07.00.56
When I try to place a node in my file, ORD prompts me it is going to create the model and then I get this error. I have checked the SUDA_SEED_FILE variable and it is pointing to my .dgnlib file.
What database is it looking for and where does it go? Is it in the .dgnlib file?
Thanks.
We just installed OpenRoads for Connect and I'm missing a few major tools within the Civil/Main tools. The Manipulate tools are now missing the Move Parallel and Move to Contact functions, and the Modify tools are missing Break Element. In their place is a description that says, for example, "Civil Main/Manipulate/Move Parallel", but when selected, nothing happens. The icons are also missing. I've tried opening a list and adding these missing functions but they don't appear and nothing works. I have to search for the function in order to get a dialogue.
Is there some workaround or update that fixes this? I'm running on the most recent version as of 11-20-2019.
Corridor object window doesn't show up only in one files. Other files not problem. Is it a problem with the file?
Looks like the way to go about it is to change the design stage of the corridors to final mesh, create a file and attach the corridors to that file. then use the create terrain models from element tool, choosing the final mesh….but what about the civil cels. how do you get a final mesh of a civil cel to add to the terrain model. thanks for your help, brian
Hello there,
Please excuse me if something below may sound like a rant, it is.
I am a long time user of MX looking to switch to ORD. The biggest hurdle for me is creating a Configuration from scratch. I have started, done some of it, but the "intelligence" of the software relies on the feature definitions and the "Configuration" itself. Without a proper Configuration this software is as useful as microstation in a sea of AutoCAD and C3D. Not all the relations between the feature definitions, annotations, feature symbologies, element templates, item types, etc are obvious, nor very well documented, as a bonus they change quite often.
Is there something like an UK Configuration for ORD?
I mean something more polished than last year, compliant with IAN184/16 and Uniclass 2015, the last one I had access to was "ordd10050030en_gb.msi". That was half baked and Uniclass in all it's glory was dumped in 1000s of levels and element templates.
I am looking at something more like the AU/NZ Configuration. I do understand that HE does not want to involve themselves in such a matter (not the best policy if you want everything BIM compliant), but when people start getting creative, like they did with MX, you end up having everyone "migrated" to C3D.
And if such thing exists, can it be distributed via zip file rather than msi? When refreshing it, requests admin privileges and we must answer too many questions, often to people who have no idea of what we're talking about, half a world apart, bored to death by anything that's not Windows, Office, pdf or sometimes PW, waste of time and energy.
Can Bentley, please, move the Configurations/Country Kits in an area where we can download them without Select? Like in the Communities or a section of the Learn server? We're not downloading software that can cause licensing issues, we're downloading content.
Some of us are forced to switch to C3D and struggle to show a viable alternative, can Bentley help us in our endeavour?
Thank you in advance for help and understanding.
Regards,
Val.
Hello there again. I would like to ask you, guys, how I can creat and set up cross section in open site. Whatever I change in settings (Explorer -> Annotation group -> Cross section -> Drawing -> 'my personal settings from our dataset in our company') I can't see in final sheet where I created cross secion of my river bed.
So, my question is, how I can set up cross section in open site If I want something like is on the picture. There are all vertical and horizontal dimensions, stations etc. Thanks a lot for the answers.
Hello all,
I am new to OpenRoads and I recently installed and I'm missing a few major tools within the Civil/Main tools.The Manipulate tools are now missing the Move Parallel and Move to Contact functions, and the Modify tools are missing Break Element. In their place is a description that says for example " Unable to find Rsc Icon for Tool at path=Drawing\Linear\Create Curves\Curves Calculator"
Is there some workaround or update that fixes this?
Hi everyone,
I have been producing plan sheets for a while and it has always been problematic. Up to now I could find ways to solve the problems but this time I couldn't find any.
Saved views of profiles getting lost occasionally. Anything random causes this. I need to save many copies of the plan profile dng file to turn back to correct one also undo never works. After the saved profile view get lost, only the profile annotations left behind. My ord version is 2019 R2 U7 10.07.03.18. This also happen previous 2 versions.
Erdem.
Hi,
In MX you could create a tilted plan from 3 points (x,y,z) by Transformation- 059 tilted plan.
How can I do something similar in ORD?
I need it to place/create a cell for a roundabout from 3 crossing roads (x,y,z)
Looking something like the below but just a terrain/tilted plan which expands beyond the circle - with the purpose to drape the circle (roundabout)
Regards,
Signe Hedegaard, DK
hai mark ,
this is vasaviii
i wont to known some information about offset ogls generation , i have designed a alignment and i have created offset strings both left and right ( at a distance of 2,4,6,8,10,12,14,16,18,20) and i have draped existing levels to them . and i extracting levels left and right through dynamic reports like by one by one , ( 2 after 4 ...) its a making long process , i need to be extract data at a time all offset levels . could you please say me how to dooo ( ,i was using benetely mx road vsi8)
Hallo all,
I'm searching answers for the following questions (and I hope for your help):
1. Has anyone found a way to label spot elevations in a regular grid? I want to label the elevations of a delta model like in the old InRoads function "Create Difference DTM" - and by the way, I tried to switch off the leadersbecause I want the label on the rexact spot, but all the changes in Dimension Style didn't stop the leaders.
2. When use a terrain in ORD 10.7.318 with the Metric Standards WorkSpace, the contour labels are writte looking downward and not looking upward as it's common behaviour. In tthe text settings and the text styles dialog I havn't found a setting to rotate the text, so I think itÄs a ORD setting (or a bug).
3. After importing a DTM from a InRoads *.dtm file and importing only the terrain I have seen some spikes in the triangles where the elevations are wrong. The error comes from the source dtm. With the Edit Terrain -> Delete Vertex I couldn't delete the points, and after switching on the Source Features-> Breaklines the point is a (end)vertex of a breakline. I tried to change the breakline but to no avail. Has anyone a idea how to correct the terrain - by deleting a vertex in a breakline or changing a terrain source feature breakline?
4. How can I thin a terrain after importing?
5. I want to see 3 different water level contours at given elevations for a retention pond. The contours don't have regular intervals and I need them written in the graphics, not as dynamic elements.
6. I want to show the results of the cut/fill volume creation limit to a part of the terrain model, but there is no option for a fence (nowhere in ORD functions!) and the named boundaries also didn't help.
7. Can anyone propose a configurate to use one workspace - maybe with different worksets - for ORD/OSD/ORLD? It's a lot of work to create, change and manage a workspace for this generation of Bentley cvil software, and managing 2 or 3 workspaces doubles not only the efforts but also the possible errors.
Thanks in advance
Steffen Roemer
Hello,I'm trying to import a utility model from SS4 to OpenRoads. I followed the instructions here. I load my .xin file, my .dat file, and my .sdb file. I didn't load a .idf file, but I'm not sure if that's necessary.Here are the issues I'm having:1. There is nothing in my Project Configuration dropdown menu to choose from. ( I guess I'm not sure if this is causing issue #2 below).
Hej
We have created named boundries representing construction phases and now would like to assign Item Types to CAD elements with Asset Manager by Named Boundry.
Firstly when I cut meshes with Quantities By Named Boundries then Asset Manager returns infor that no elements found in Named Boundry and no Item Types are attached (tried with both options: inside and overlap)
Secondly what we need is to have Named Boundry Name to be attached to CAD elements as Item Type Property, so every CAD element is tagged with Named Boundry name, eg for the sake of schedule simulation, (4D, 5D, etc.
I wonder if any of you here had similar idea to tag CAD elements, and an issue with using Asset Manager with NB.
Thanks in advance for your help.
/Adam
I'm working in OpenRoads Designer, and need to get a section of the terrain that I can use to draw out multiple shifted pavement locations in cross section/typical section view without going through the process of creating all of the corridors. I can't seem to find a way to use a pattern line (Geopak way) or named boundary (ORD way) that allows me to have that existing ground line that I can recreate multiple times for my needs. Please help, at this point I'm going to have to measure and draw my own existing ground from the terrain, and as you can imagine that is not an efficient process.