I am trying to clip Corridors that are tunnels. I want them to clip in 3D. This is supposed to work in OpenRoads, but i have not succeeded. It just clips 2D as before.
↧
Tunnel Corridor Clipping in OpenRoads
↧
ObjectSpace Browser error and/or Microsoft.NET Framework error
I am running Windows 7 and working in Power GEOPAK V8i SS4 version 08.11.09.878. I am working with Corridor Modeling. I have a roadway model that is about 2 miles long. Pretty simple corridor. When I try to open "corridor objects" I have issues.
I initially had an ObjectSpace Browser error: "Unhandled exception has occurred in a component in your application. if you click Continue, the application will ignore this error and attempt to continue. OpjectSpeace was previously disposed."
I ran windows updates, and now it get the same error except it is shown as a Microsoft .NET Framework error instead of an ObjectSpace Browers error.
I ran the civil display browser "medic" tool.
Other than to start over, I'm not sure where to go from here. Anyone have similar issues that have been resolved?
Dawn Michel
↧
↧
T Intersection civil cell placed at wrong elevation
When placing a T intersection civil cell, the horizontal appears fine, but the elevation of the cell is well above (~100') the profile of the side street C/L. Any suggestions on why this might occur?
↧
how to record a 3D Model drive through as a .mkv or .avi ?
.
↧
Civil Profile
Hey there. I have one question. I want to create Civil Profile. I know whole method how to do this. But my problem is, that I don't know how to add to Profile View more lines like one selected line. Can you give me an advice how to do this? Thanks a million for every answer.
Have a nice day
Adrian
↧
↧
VERY SERIOUS BUG! - DGN / Corridor / Lines Corrupt after changing Country settings - ORD 2019 R2 U7 (10.07.03.18)
Sometimes the company changes the country settings of our computer. If we notice this not quick enough, and change a dgn file, Corridors and Lines (what I noticed so far) made with the earlier settings, becomes
corrupt.
This can bring ORD users in serious troubles!!
↧
OpenRoads Profile Annotation
I would like to insert a text break into the title box annotation for each row of my profile grid. How do I do this without doing it manually after the profile is annotated?
↧
OpenRoads Profile Annotation
I have set up a profile annotation group and all of the supporting Element Templates in a dgnlib. I have used the Element Templates to set the level for each annotation entity however, when I apply the annotation group to another file, all of the annotation appears on the Default Level. Why is this?
↧
Depth lock and snap point
Hi everybody.
In older versions of Microstation, it was possible to completely lock the working depth in all cases.
I mean that when I wanted to draw a line at the depth 0.00, i was setting this active depth, i would activate the depth lock, and even if i reached the line at a snap point which wasn't at depth 0.00, my line was.
Now, in OpenRoads Designer, it doesn't seem possible anymore. I can't find any place where i can lock the depth against a snap point.
Does anyone have a solution ?
Thanks in advance.
Bernard.
↧
↧
Node (Inlet) Minimum Depth
I am running SUDA (Power Geopak SS4) and need to design an inlet that has a depth of 2 ft. Right now the inlet when placed defaults to like 2.75 ft. and we can't change it to be anything less. Is there something we are missing in the set up of the Node to be able to change that depth to something less?
↧
ORD 2019 R2 Refresh – Problem with Transform Tool on Vertical Complex
Hi, when using Transform Tool on PI based vertical complex element (comprising tangents and curves between elements) with copy option un-checked (to basically move the alignment) the resultant complex element changes last curve to “curve from element” and extends last tangent back to PI towards the curve. This way integrity of the vertical alignment is lost and subsequent changes to the curve results in non-tangential connection. This problem occurs using all three methods: Cursor Points, Deltas and Points.
Below is sample original complex:
And the following is the complex after transformation:
In order to fix the alignment dropping complex, deleting the affected curve and re-creating the curve as “curve between elements” and re-complexing is required (with all its consequences).
Has anybody experienced this problem?
We consider transform tools very useful but this problem require additional, unnecessary work to fix alignment. Note, one use of transform tool can be to simplify alignment in such way that gradients of associated tangents remain fixed when one tangent is changed by manipulators (moved, gradient changed etc.) – unlike using Simplify Geometry tool.
Regards,
Mariusz
↧
Overlay/striping not show the style when surface created
Hi there.
I have a issue with the overlay/striping component not showing the style when created as surface.
When I look at it in my Roadway designer i have no problem viewing the overlay/stripping with the correct style.
As soon I create a surface of the overlay/striping component it dosent shows with the correct style. When i look into my "Name and symbology" everythings seems to be setup correct.
The component is placed on the correct level, just not shows the correct style.
When i try to "drop element" and set the single mesh faces ByLevel, it changes the color to match the correct style.
I am working on Power Rail Track SS2.
Does anyone have had simular issues, and does anyone have a solution for this issue?
↧
Create terrain by text interpolation not work
I created a 2d file where I placed heights using the text tool.
Then I attach this 2d file to 3d model.
When I try to create a terrain model, nothing happens.
I tried exactly as per the instructions:
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/9881/video-import-text-as-spot-elevations-to-create-a-terrain-model
I am posting my DGN file and asking for help
https://1drv.ms/u/s!AoKLTsHic9oZiSHoczmtQ3funPgH?e=8TW1OH
↧
↧
DTM Import error Inroads ir081109878
I'm having an issue where we import a DTM and the surface generated is incorrect one way correct another.
Importing via Terrain Model it creates misc / incorrect contours. It almost looks like there is extra triangles being generated that its causing extra contours.
Importing via legacy InRoads it generates the surface fine.
Has anyone ever had an issue when importing one way vs the other gave different outcomes?
The contour intervals were both set at 1' intervals.
↧
Limiting slope on through lane while curb profile is variable
I can't help but feel there is a simple solution for this but here I am, in need of the great wisdom of the community here.
I'm trying to get my road shoulder slope to vary while the slope from my centerline to the edge of travel lane fixed at 2%, while my gutter inslope from edge of pavement to the gutter flowline is fixed at 6%. A vertical point control will be placed on the flowline so the curb will move vertically depending on the curb profile.
The road shoulder should never be flatter than the slope of the through lane. If the road shoulder needs to be flatter than 2%, the through lane will match the road shoulder slope.
The two not-really-solutions I could think of are:
1) Setting a zero vector-offset between the centerline and the edge of pavement but my through lane slope will be matching the road shoulder slope when it is steeper than 2%.
2) Setting a slope constraint of 2% from the centerline for the through lane but the shoulder could be flatter than 2% and cause a dip.
How do I get the shoulder slope to vary so it is 2% or steeper when the curb profile is low enough, and also able keep the through lane slope to match the shoulder slope whenever it gets flatter than 2%?
Thanks for any help in advance!
↧
OpenRoads Concept Station Question: What's the difference between "Ramp(Left Origin)" and "Ramp (Right Origin)"?
Trying to add ramp from freeway to minor road, don't know what is the difference between these two option: ramp (left origin) and ramp (right origin)
Could anyone help to answer my question as soon as possible?
See attached screen shot.
Thanks.
↧
Profile Sets
When I create profiles in In-Roads everything works great, I save the project and the alignment. When I close In-Roads and open my files again the profile sets are never saved thus I can't modify the profiles that I created nor add points to profiles etc. Is there a setting that I am missing or how do I get the profile sets to save?
↧
↧
[OR SS4 .878] Issue with Annotate Cross Section < Create Cross Sections < Process Corridor, and Feature Definitions > Cross Sections > Element Template
Practical question: How do I get rid of these crossing features that I no longer want to show up in my cross sections and my annotation list?
Allow me to trace the problem back.
Primarily, when using Annotate Cross Sections, I want my Crossing Features list to be populated only by those features that I want to annotate so that I can simply click All, instead of taking a lot of time to select only those features that I want to annotate. It's not relevant to the solution, but just so you know why I'd rather do this: I have a huge number of surface and subgrade features, and I want to annotate only surface features, and even then I don't want to annotate some surface features.
This means, in part, that for the points I do not want to annotate, I need to not have an "X" where the feature crosses a generated cross section. (I speculate that I also need to not have a point where the feature crosses a generated cross section, but that's moot for me at the moment, since I see no such points in my set of cross sections: I confirmed this by selecting everything in the cross section and assured myself that there are only non-zero line segments, characters, and cells.)
This means that I need to be sure that, via Project Standards and Element Information, the element template field for cross sections needs to (1) be blank, or (2) be supplied with a selection that does not place a character or cell under Point Settings. For all the feature definitions that I don't want to show up, I have made sure that in the file in which these features are created, both native and element template is blank under cross sections. (I've also made sure that the Create 3D Automatically is disabled as well, though again, that's moot for me.)
From the above, I should be confident that no X will be created in the cross sections, but there they are. Now, I recently revised the element template for those points that I do want to show up. To test, I revised the element template so that the features that I do want to show up in the cross section annotation list will now display a distinct circular cell instead of the character 'X'. After I reprocess the corridor, we should guess that any X that shows up in the cross sections at this time should be zombie elements. I find that this is true: The Xs that I see in the cross sections are representing those features that were already created in previous corridor reprocessing.
Fundamental question: How do I refresh the corridor's file to the point that these old features are no longer constructed in cross-section space with a template that it is no longer associated with?
I tried deleting the offending features from the corridor file's 3D space, but that was unsuccessful; I cannot delete any of the 3D features from the corridor's 3D space. What else can be done here?
↧
[OR SS4 .878] Element Templates are honored in one corridor's dynamic cross sections but not another corridor's
In one single file I have two corridors (note: this is not just two template drops within one corridor), both corridors along different segments of the roadway separated by a bridge.
Some of my feature definitions use one common element template to place a circular cell where features of that definition cross the cross section. I have made sure I reprocessed both corridors since making the change.
One of these corridors honors that element template and places a circular cell as desired. The other does not honor that template. Why not?
↧
Alignment File Crashes when trying to remove vertical inflection point
I am trying to remove a VPI from my complex verticle alignment. When I use element selection - delete vertex, it crashes my system. Is there another way to delete VPI points out of verticle alignemt?
↧