I deleted a corridor/alignment from ConceptStation, however some of the transitions did not delete and now they are stuck in the Conceptualization. Is there anyway to delete these when the Trash Can icon does not work.
↧
ConceptStation deleting a transition
↧
How to make chain stations match centerline stations
Hello
This may be really simple but I have three chains in my project. One is the road centerline chain and the other two are edge of pavement chains. I built my existing ground cross sections using the road centerline chain and am using the other edge of pavement chains to make the existing roadway and build extra lanes from. So really I’m wanting my edge of pavement chain stations to correspond to the centerline station. Any help in doing this is greatly appreciated.
↧
↧
ORD import terrain breaklines form text file
Hi all
I am struggling with setting up import text file parameters for a file that contains breaklines. The breaklines are formated in the way that the points belonging to a beakline are separated between lines START and END. Than each line is composed with X Y Z separated by a space. I am not getting any results ie import is successful but no lines created nor the terrain model.
Start 389315.70 639222.42 194.20 389306.68 639310.05 193.89 389301.92 639358.50 193.55 389303.02 639367.38 193.38 389298.73 639408.97 193.21 389291.78 639463.40 193.38 389283.19 639536.03 193.55 389275.41 639590.54 193.05 389268.29 639647.29 192.88 389263.05 639698.88 193.05 389257.53 639748.12 193.55 389254.16 639776.38 194.17 389247.57 639818.38 193.83 389240.31 639875.59 194.68 End
↧
Showing Pipe Widths in SUDA
Folks:
I have been working and testing SUDA and have really enjoyed the process. However- and for whatever reason- my nodes are showing up correctly and the 3D models are showing up beautifully, but the pipe widths in the 2D view do not appear; only a single line (with the correct attributes) appears rather than the videos which I have watched which show an 18" pipe (for example) which shows two lines 18" apart from each other. I have searched all through the program for where this setting may be, but cannot find it. So, where can I access this particular function "toggle", so to speak?
Thanks in advance!
Mark
↧
Element Profiles not working when using Xref'd file
Hi
I am using OpenRoads Design Connect Edition V10.07.00.56 and am having trouble with getting profiles from an xref'd file to project with all the options available under "Element Profiles".
I have a separate file for my point control elements and centre line and am trying to project the vertical profile of my centre line onto a point control, but get "Element is in a ReadOnly reference" when I try to select the centre line.
I have tried turning on "Treat Attachment as Element for Manipulation", but then get "Element Type is not valid for this tool".
Any help would be greatly appreciated,
Thanks
↧
↧
How to import MX alignment into ORD
Hi,
Is it possible to import geometry from MX into ORD for further modeling? And how?
Can you import the inputfiles directly as in ss4, or a MX model, or as a .xml? genio?
Thank You
/Signe
↧
Boundary Creation in OpenRoads
Hi..
How can i Create a Boundary for a Particular portion and how can i do the Isopachyte Analysis for the Design and Ground surface
↧
Cant alignment schematic not display correctly in Profile Annotation
In profile annotation in PRT, when there is a left hand side horizontal curve, it displays right to the center line and in cant alignment outer edge (right edge) displays left to the center line. so it displays correctly. But when there is a right hand curve, it displays left to the centerline and in cant alignment outer edge (left edge) also displays left to the center line. But actually it may display on right to the center line.
can anyone have solution or explain what happened here?
↧
Boundary Creation
Hi,
How can I create Boundary Manually and how can I do the Isopachyte analysis in Openroads
↧
↧
Bentley Civil v8i SS10 Update
Hi all,
I see there are new v8i SS10 versions of PowerCivil, GEOPAK, Inroads, etc family products on Bentley Downloads to work with CONNECT licensing (and MicroStation v8i SS10 released a few months ago).
Any word on an update to MX to use CONNECT licensing so we can still use it when then SELECT Servers don't accept the old licensing keys anymore (whenever that will be)?
Regards,
Mark
↧
ORD U7 - Corridor Reference isn't Accurate
Hi,
Since upgrading to U7 I am noticing that point controls and corridor references are not as accurate as they used to be.
communities.bentley.com/.../Corridor-Detail.zip
Left and right sides do not match the matchline.
Why is this happening?
Josh
↧
I will like to find out about refresher courses for inrail. About 10years ago, I was very proficient at inrail, hence I need a refresher course. I am presently in London UK
Refresher in Inrail required
↧
XSR
Does anyone know how to generate an XSR from cross sections cut using OpenRoads? Is it possible? I have never generated an XSR so I am not sure where to begin or if it's possible being that it's a Geopak tool.
↧
↧
Design Surface Tools
I am moving from Inroads to OpenRoads. Are the Design Surface Tools such as "Place Feature", "Generate Longitudinal Feature", "Drape Surface", "Project Line to Surface", and "Generate Isopach Surface" available for use in OpenRoads?
Thanks,
Jason
↧
Open Roads Open site Driveway Properties
I am trying to edit the max and min slopes in the properties manager. If I change the value it goes to zero and cannot be reverted back to the default values. How do I change these values?
↧
LAZ File Import Spatial Error
I'm using OpenRoads Connect Edition 2018 Release 2.
I've received a LiDAR LAZ file (compressed form of LAS) that has been post-processed, and have successfully imported it and created a POD file, however, whatever combination of import parameters I use to import and convert the LAZ data, the POD shows up way northeast of the project location. After playing around for awhile, ORD appears to be attempting to convert it from Meters to Feet/US Feet - determined from checking the math between the Geometry and Metadata panes of the Properties Window, attached. The Geographic Information options in the Convert dialogue only allow the user to specify the Source Geometry Unit, not the datum. I've already placed the model in the correct datum, which is the same as the survey data, so even if it is trying to use the DGN projection, that shouldn't cause the error.
Is there a way to force ORD's point cloud tools to use the curre
nt or a selected datum and not attempt to convert it, or will I have to get some additional software to convert the LAZ (in order to avoid having to manually scale it back to the metadata)?
Under Properties-->Survey I copied the following text, which appears to describe how the data was reprojected, but I'm unable to find any way of adjusting this:
PROJCS["EPSG:102696",GEOGCS["NAD83",DATUM["NAD83",SPHEROID["GRS1980",6378137.000,298.25722210]],PRIMEM["Greenwich",0],UNIT["Degree",0.017453292519943295]],PROJECTION["Transverse Mercator"],PARAMETER["False Easting",820208.333],PARAMETER["False Northing",0.000],PARAMETER["Scale Reduction",0.999933333330],PARAMETER["Central Meridian",-90.50000000000000],PARAMETER["Origin Latitude",35.83333333333334],UNIT["Foot",0.30480060960122]]
I've also attempted to create a Terrain directly from the LAZ file (since this dialogue allows the user to select the source datum), which results in a "Failed" error with no additional information provided; I assume the file needs to be in a more recognized format for it to convert it to a Terrain, which brings me back to needing the point cloud tools.
I have not been able to test LAZ files from other sources, but this group has provided me two sets of Quality Checked data and I have had this issue with both.
Any tips or other options would be appreciated.
↧
Exporting Superelevation Data from OpenRoads Designer & Superelevation band in Profile Band
Dear All,
Greetings!
Is there any tool to export the Superelevation Data from OpenRoads Designer in Land XML format?
Also how to add the superelevation band in my profile view?
All helps will be appreciated..
Thanks in advance...
↧
↧
Transition between TWO CURVES
Hi,
How can i Give the transition Between TWO Curves in Open Roads. as i have attached in the Screen Shot please help me
↧
Reverse transition between TWO Curves
can any one share the video how can i use the reverse transition between TWO Curves
↧
ORD U7 - Weird Crash Behaviour
Hi,
I've seen ORD crash before but never quite like this. Once the crash is triggered it's not a single file that crashes, it's every single ORD process. No crash report to submit, task manager and end task is the only way to be rid of it.
Any one else getting this?
Josh
↧