RE: Civil Cell Information
Hello Andrea, Please refer the below link for your reference.bentley.sharefile.com/d-s0e19be4447c49d2a Cheers, Purva Lakde
View ArticleCivil Cell Information
Bentley Systems, Inc. has been working with the Mississippi Department of Transportation regarding the migration to Open Roads Technology and PowerGEOPAK 08.11.09.493 platform. (Note, this will apply...
View ArticleRE: Profile Run with Subsurface Utilities
Attached is a DGN of a small network that I made up. It did the same thing as mentioned earlier. Thank you so much for your help. (Please visit the site to view this file)
View ArticleRE: Display an Microstation 3d object(smart solid, mesh etc.) in InRoads Ss2...
Hi Mishu, Unfortunately, we do no currently have this functionality. Please see the link below for related defects, although these defects are for OpenRoads, I have tested in SELECTseries 2...
View ArticleRE: Display an Microstation 3d object(smart solid, mesh etc.) in InRoads Ss2...
My question is if it is an application in InRoads Ss2 TO DISPLAY an 3D Object in cross-section. I understood that it is no solution for InRoads Ss2 or Power InRoads Ss4 to display an object 3D? No...
View ArticleRE: Display an Microstation 3d object(smart solid, mesh etc.) in InRoads Ss2...
Mishu, in InRoads SS2, in order to display something on a set of InRoads-created Cross Sections it needs to be put into the Surface / DTM, or created as a Surface.
View ArticleRE: Display an Microstation 3d object(smart solid, mesh etc.) in InRoads Ss2...
the problem is we have vertical faces and the surface can not be create. Is it a way to do it like a manhole drainage? Actually It's only 2 parallelepipeds one on top the other or one parallelepiped...
View ArticleDisplay an Microstation 3d object(smart solid, mesh etc.) in InRoads Ss2 in...
Hi,Display an Microstation 3d object(smart solid, mesh etc) in InRoads Ss2 cross-section.I have 120 structure pier+piles and I need to put them in InRoads Ss2 cross section. I have them like smart...
View ArticleRE: Display an Microstation 3d object(smart solid, mesh etc.) in InRoads Ss2...
Right, I knew the vertical faces were going to be the problem relative to creating actual surfaces from that data. And yes, you could probably reconstruct them in S&S but that would require...
View ArticleRE: [OR] Surface Templates - Any Way to Have the Top Follow the Top, but Have...
I created enhancement 665289 for this request.
View ArticleClik here to view.
[OR] Surface Templates - Any Way to Have the Top Follow the Top, but Have the...
While Site Modeling, we sometimes need a Raised Concrete Area but the top edge must be offset from the base to get a Terrain Element / DTM from the model. If we try to apply a surface template to this,...
View Article[OR] Project to surface causes the component to follow the surface
Using Geopak SS4 .878.My goal: Find the surface created by cutting a 7% slope from the proposed top of bank of an existing ditch. The proposed top of bank is 3' above the existing flow line. My...
View ArticleWhy does storm and sanitary re-evaluate the Tailwater condition in the middle...
I have a trunkline of 10+ pipes and inlets with a number of branches. The HGL is being forced artificially up at certain structures (not do to structure headloss), and at those structures I get the...
View ArticleClik here to view.
Clik here to view.
OpenRoads Navigator: How do I set the display units for measure tools
A user asked:This is what we use for working units. What should we be changing this to before we create the model? Lou's Response: The format of the measure tools in OpenRoads Navigator is based on...
View ArticleRE: GENIO input of Triangulation from external source
The string identifiers and labels come from the strings that the triangulation is made from. this data is presumably not part of your surveyors data, and you are not going to be able to 'make it up'....
View ArticleRE: GENIO input of Triangulation from external source
Thanks Mark. I have written a routine that does exactly that (creating individual strings for each triangle side), but there are a few MX related problems: 1. To not run out of string labels (I am...
View ArticleGENIO input of Triangulation from external source
Sorry for the long post!)I need help with creating GENIO files of triangulations from external sources.I receive triangulation data from surveyors in a text format which I can interpret understand the...
View ArticleRE: Need data related with civil projects made with bentley software
If you look just a little lower on this page, you will see a "Contact Us" link, which will take you to a page with the information for Bentley Corporate Headquarters:Corporate HeadquartersBentley...
View Article