RE: Geopak Roads Cross Section Composition
I had a different scale on the xs vs the sheet composition. They are working now. Your input was greatly appreciated. Have a good one Jorge
View ArticleGeopak Roads Cross Section Composition
I was able to drop the sections on the sheets using "Cross Section Sheet Composition" but they don't fall on the grid at the correct elevations. Since I was running out of time, I went ahead and moved...
View ArticleSystem Requirements for InRoads Suite
Can someone please list or refer me to the system requirements for InRoads Suite? Thanks
View ArticleRE: ConceptStation Intersection
Hi Beebe, I was looking this yesterday and came to same the conclusion and method you have advised. Is there a tool in ConceptStation to assign the profile of a Proposed Road existing ground...
View ArticleRE: ROW lines in Inroads cross sections
If you don't want to change the cell scale (or create another one for the correct scale), then either use the InRoads Global Scale Factors when you display it, or go to the Named Symbology for that ROW...
View ArticleROW lines in Inroads cross sections
Hi everyone.First of all I want to show Existing ROW boundary in a cross section. I followed https://www.codot.gov/content/business/designsupport/CADDmanual/CDOTAlignmentDisplayinCross_Section.pdf...
View ArticleRE: ROW lines in Inroads cross sections
THANKS A LOT MATE. It worked. I think style scale is the best way. cheers.
View ArticleRE: [OR] Removing Open Roads Data from a Model to Unlock 3D Model from...
Chuck, try to export Default model to new dgn file. And replace original file (one with Default-3D) with this exported one. You can alternativelly use FF= key-in to copy fence content to the new file.Â
View ArticleRE: splitting corridor to reduce size
Remember you can change baseline of corridor with "corridor reatach" key-in. May be helpful when changing set up of your file, eg. moving CL to sparate dgn file and referencing it to the corridor dgn...
View Articlesplitting corridor to reduce size
I have a 1 mile long corridor(mainline) with many civil cells attached onto the pavement edge (civil cells in separate files). The ML corridor is getting way to big in size after clipping all the civil...
View ArticleRE: [OR] Removing Open Roads Data from a Model to Unlock 3D Model from...
I open the offending files in Descartes. Detach all references. Seems to be a decent "work around". I have my doubts as to the effectiveness of the FF command. I think the issue will persist into the...
View ArticleRE: System Requirements for InRoads Suite
You can find system requirements by downloading the ReadMe found here: communities.bentley.com/.../271808 Chapter 4 list the requirements. This is for the latest version 08.11.09.878, as well as...
View ArticleRE: Create Cross Sections Fail
Any other factors? network? have you cleaned your temp xml files under the 8.11 folder?communities.bentley.com/.../15923.geopak-resource-files-how-to-remove-them-and-why
View ArticleRE: splitting corridor to reduce size
I ended up doing a file save as on the ML corridor. I changed the template drop on both be at the halfway point. I then had to go into my civil cell files and delete the cells that no longer applied....
View ArticleRE: Import tif-files
If you are using the SELECTseries 4 version, you can import a TIF directly to create a terrain. Go to the Tasks > Civil Tools > Terrain Modeling > Create From File and change the Files of type...
View ArticleRE: Create Cross Sections Fail
I tried that and it doesn't seem to help at all. I can't see any other obvious factors. I have tried creating a new file and referencing in my corridor data, but same result. I tried to run the...
View ArticleRE: Create Cross Sections Fail
ok. can you post the file? does it happen in any workspace?
View ArticleRE: Create Cross Sections Fail
I've noticed sometimes when the alignment is broken/goofy, it'll mess up the creation of cross sections. I think you need to narrow down what is causing the issue. is it the existing terrain? the...
View Article