If you go to Tools > Application add-Ins, you can turn on 'Horizontal and \vertical \elements Add-In'. Is that what you were looking for?
↧
RE: Missing Horizontal and vertical elements
↧
RE: ORD - Import Template
This is scheduled to be included in a future release. You are correct it was in the EAP2 for testing, but they found some problems that they wanted to fix before including it in a release.
↧
↧
ORD - Import Template
Hi,
Where's the option to import a 2D drawing to a template from elements? It was available in the EAP2?
Thanks in advance.
Regards,
Christiaan
↧
RE: Missing Horizontal and vertical elements
I don't seem to have the following options as well. I have attached another screenshot as well.
↧
RE: Missing Horizontal and vertical elements
Actually I am blind, by the look of it. It helped me, than you very much, Mark.
↧
↧
Unable to load/create dialog...
I am getting this error upon opening ORD:
↧
RE: Cad file not importing a coordinated
can you describe one of those lines in your GENIO file. I'm not familiar with GENIO files. and please describe your assumed coordinate system in detail. UTM is just not enough.
what about this answer about us survey feet unit?
are you still looking for a solution?
what about this answer about us survey feet unit?
are you still looking for a solution?
↧
RE: Missing Horizontal and vertical elements
My Grandmother used to say "If it was a dog, it would have bit you!"
We all sometimes have Brain F*rts!
We all sometimes have Brain F*rts!
↧
Geopak WAN Issues
Hello,
We are intermittently experiencing issues with Bentley GEOPAK Suite V8i (SELECTseries 2) 08.11.07.615 as described in this previous post:
[View:https://communities.bentley.com/products/microstation/f/142/p/15354/30603#30603:940:0]
"User1 opens a file over the WAN. User2 attempts to open the same file and does not get any sort of warning that the file is already in use. User2 then has access to all tools with no "Tool not allowed. File is Read-Only" messages. Levels appear to be incorrect, but the file functions as normal for both users. The only indication that anything is amiss (besides whacked levels) is that User2 gets an occasional message that the network connection has been lost. Retry and keep going. Ultimately, User2's changes never save, but a lot of time and work can be wasted in a file that User2 should not be able to access at all. Meanwhile, User1 works and saves normally."
There wasn't a fix stated and I was hoping someone may know a fix. We use Panzura as a file server and do experience latency from time to time between sites. The projects with issues are Geopak projects that are worked between sites. Thanks!
↧
↧
RE: Cad file not importing a coordinated
This is done,Thanks All.
↧
RE: Function Annotate Drawings or Pages
Thanks for the quick response.
Tried with provided option by trouble shooting option. But problem has not been solved. Still annotation window am unable to see. And also after trouble shooting, software is asking each and every time administrator password.
Kindly suggest.
Tried with provided option by trouble shooting option. But problem has not been solved. Still annotation window am unable to see. And also after trouble shooting, software is asking each and every time administrator password.
Kindly suggest.
↧
RE: Function Annotate Drawings or Pages
Hi Cheetan,
You need to make sure you are running the MXROAD on ADMINISTRATOR mode,
Guest or Standard user not advisable, talk to your IT department.
Check what type of antivirus you are running as well, Some of them will block the application.
And also UAC must to lowest.
You need to make sure you are running the MXROAD on ADMINISTRATOR mode,
Guest or Standard user not advisable, talk to your IT department.
Check what type of antivirus you are running as well, Some of them will block the application.
And also UAC must to lowest.
↧
RE: Changing dimension units in open roads ?
When applying a dimension, open the Dimension Styles dialog, and amend the Units to be the units required. The Dimension Style can be stored in a DGNLIB for use everywhere.
Read the topic "Drawing Composition > Annotations > Dimensioning" in the Help file.
Read the topic "Drawing Composition > Annotations > Dimensioning" in the Help file.
↧
↧
Changing dimension units in open roads ?
What is the standard way to change drawing units in open roads?I have these units in centimeter i want to change them to metres
↧
RE: [MX linemode] Interface for fill/cut
Aleksander - that is the way INTERFAC works. When going from cut to fill, the 'flip' point is interpolated at the level datum string (LDS), giving the situation on the left of your diagram.
You can specify a barrier string (261/262 - field 1=BARR) to get this point moved away from the LDS, but you will still have to manually amend the strings - see Example 26 in the Help file -Linemode>Interface.
You can specify a barrier string (261/262 - field 1=BARR) to get this point moved away from the LDS, but you will still have to manually amend the strings - see Example 26 in the Help file -Linemode>Interface.
↧
[MX linemode] Interface for fill/cut
Hello,
I can't cope with input interface function creating earthworks. I'm able to write a right fill/cut conditions but there must have a different names of strings and get awfull transitions areas without ditches (gaps). I need to make a manual corrects in such places. Is there any solution to manage such thing. Below is part of my input (sections "S" - survey, "D" - ditches levels) and dwg with drawing:
INTERFAC,S7 DITCHES PP,S7 EARTHWORKS
259,INTI
260,1=MC10,2=IA10,3=IA10,4=-11,5=38100,8=38400
261,1=D ,2=ES10,3=IP10,4=5,5= 5.1 ,7=-0.33333
261,1=IGN ,2=IP10,3=RP10,4=5,5= 0.375 ,7=-0.62222
261,1=IGN ,2=RP10,3=RD1P,4=5,5= 0.375 ,7=-0.17778
261,1=IGN ,2=RD1P,3=RP11,4=5,5= 0.375 ,7=+0.17778
261,1=IGN ,2=RP11,3=IP11,4=5,5= 0.375 ,7=+0.62222
261,1=IGN ,2=IP11,3=IW10,4=5,5= 2.1 ,7=+0.33333
261,1=S ,2=IW10,3=IW11,4=5,5= 2.0 ,7=+0.5
261,1=S ,2=IW11,3= ,4=5,5= ,7=+0.66667
262,1=D ,2=ES10,3=RT10,4=5,5= ,7=-0.66667
262,1=IGN ,2=RT10,3=RD1T,4=5,5= 0.20 ,7=-0.0
262,1=IGN ,2=RD1T,3=RT11,4=5,5= 0.20 ,7=-0.0
262,1=IGN ,2=RT11,3=IN10,4=5,5= 0.75 ,7=+0.66667
262,1=S ,2=IN10,3= ,4=5,5= ,7=+0.66667
262,1=S ,2=IN10,3=IN11,4=5,5= 1.00 ,7=+0.0
262,1=S ,2=IN11,3= ,4=5,5= ,7=-0.66667
263,NODI
Best regards
Aleksander Zamorski
[View:/cfs-file/__key/communityserver-discussions-components-files/5922/EARTHWORKS.dwg:50:0]
↧
RE: [MX linemode] Interface for fill/cut
Thanks Mark, I know BARR functionality, but it isn't solution :(
I've tried multi line cut-fill-only-261 solution but I failed :(
Probably this is a first civil3D advantage over MX.
I've tried multi line cut-fill-only-261 solution but I failed :(
Probably this is a first civil3D advantage over MX.
↧
↧
RE: Unable to load/create dialog...
Take a look at this wiki article, You have Microstation Connect as part of the ORD product so this could apply.
communities.bentley.com/.../10583
Are you running in a custom workspace/workset? If so try just running the default untitiled that comes with the software and see if the issue continues.
communities.bentley.com/.../10583
Are you running in a custom workspace/workset? If so try just running the default untitiled that comes with the software and see if the issue continues.
↧
RE: Geopak WAN Issues
I asked around some and don't believe there is anything that has "fixed" these type latency issues when multiple people access the same files over a wide area network. They did suggest looking at the following article regarding file access with Shared Network Drives.
I also looked around some on the internet and came across a webinar by Panzura regarding File Open latency issues and how to resolve them over WAN. I don't see much information on it but thought I would share this as well:
↧
Has anybody used the Attributes in Openroads, not Inroads?
Has anybody used the Attributes in Openroads, not Inroads?
I am trying to use the native codes in Openroads but with no luck.
↧