field data file
We have a new Ranger3 data collector, using Survey Pro software. The default field data format is .survey. I can process the raw file by converting it to a .csv file or a raw text file.When in text...
View ArticleRE: Custom Civil Report Browser Stylesheets
Agreed. I've tweaked a few of the delivered style sheets, so I sometimes need to check which one too keep in case I need to adopt the delivered one and tweak it again.
View ArticleRE: Editing Spot Labels on Terrain Modelt
It should be reading the Design File Settings > Working Units > Accuracy option. Check to see what those are set to and make sure they are set to 2 decimal...
View ArticleRE: How to create 3D contour based on contour shape file?
Hi Chuck, Thank you very much for your question, which basically answered my question! Is Bentley Map delivered free with Inroads ss3 and GeoPAK ss3? I agree with you regarding be cautious in using...
View ArticleClik here to view.
RE: CIVIL_SHOW_MS_PROPERTIES
I am not sure of every element type that this variable controls and adds information to the properties. There may be some cases where it is the Extended or Raw Data that appears as mentioned in this...
View ArticleCIVIL_SHOW_MS_PROPERTIES
Anyone know what the "CIVIL_SHOW_MS_PROPERTIES" configuration variable actually does? I read the description in the Help file, but when I try turning it on/off, I don't see anything different. Any...
View ArticleRE: How to create 3D contour based on contour shape file?
You can load the Lidar using the ERDAS img format, I believe. This is done in Data Acquisition in Ss2 and under the Terrain tools in Ss3/4. There were issues in certain versions of Ss2 with units and...
View ArticleRE: Corridor Modeling Cross Section Creation gpk cells not displayed correctly
Sanders, Thanks for your reply. I've checked the Terrain and it appears the elevations are from 920 to 804, so there doesn't appear to be any negative values. Any other suggestions? Thank you. Aaron
View ArticleClik here to view.
Corridor Modeling Cross Section Creation gpk cells not displayed correctly
I'm trying to create cross sections after creating a corridor with superelevation. When I create cross sections using the "Stacked: GEOPAK Format" the gpk cells do not display correctly. Some...
View ArticleClik here to view.
RE: How to create 3D contour based on contour shape file?
Hi Chuck,Thanks for your so detail help.The Lidar DEM is 0.9m resolution. It can be seen in ArcCatalog as raster dataset (please see below)However, it is shown as two folder in windows explorer (please...
View ArticleRE: Civil Geometry using Snaps
I believe I solved my own issue. I was working within the 2D model instead of the 3D. When I created a new 3D model to draw my elements, the snaps had no problems. Glad it was the fatal flaw that...
View ArticleCivil Geometry using Snaps
Good afternoon,I am fairly new to using Open Roads and Civil Geometry to lay out edges of pavements and the like based off my alignment. I have been consistently been running into an issue when trying...
View ArticleSuperelevation apply to Corridor Reattach?
Does the corridor reattach command apply to superelevation as well as geometry. If not, is there a way to reattach the superelevation to a corridor after reattaching geometry to a corridor?Thanks.
View ArticleRE: How to create 3D contour based on contour shape file?
No images are displaying on my end.
View ArticleRE: Plan and profile Crossings annotations thru Plan and profile generator
what software and version are you using?communities.bentley.com/.../128636
View ArticleRE: running driveways using geopak V8I
what does the typical documentation say? is it for shapeless criteria or shapes? they should have a variable list as well. you need to make sure you know what it expects to find. you can also take a...
View Articlerunning driveways using geopak V8I
Trying to run proposed driveways off of our mainline or highway. The only improvements to the mainline are the shoulders. There is no reconstruct or overlay to the mainline. I have ran driveways...
View ArticleClik here to view.
RE: How to create 3D contour based on contour shape file?
Sorry for the missing info. I attached them now.
View ArticleRE: Plan and profile Crossings annotations thru Plan and profile generator
We are using Inroads SS2 version
View Article