Lene
As you are not using the OpenRoads vertical geometry tools, the Civil formatting setting does not apply here.
The 'native' PowerCivil vertical geometry tools seem to allow only Length, r, or K values, so in your case the easiest thing to do is to divide your Radius by 100, and enter as the K value.
As you are not using the OpenRoads vertical geometry tools, the Civil formatting setting does not apply here.
The 'native' PowerCivil vertical geometry tools seem to allow only Length, r, or K values, so in your case the easiest thing to do is to divide your Radius by 100, and enter as the K value.
