Regarding Vertical alignment
Any one can help to draw a vertical profile at constant distance (E.g:- say 0.25 m) above ground level.
View ArticleClik here to view.
PowerCivil SS4 - Cicular Curve Between Elements (vertical)
HiWhen using "cicular curve between elements", the curve will show as a straight line if the difference between the elements is <= 10 ‰.see pictures below:picture 1: difference = 10 ‰ picture 1:...
View ArticleRE: [OR Ss4] Is there an Open Roads Corridor Equivalent to the "Automatic"...
I haven't found any of the old DESIGN SURFACE tools. This is a good example for their use should you decide to finalize your parking lot with this method. I use these tools often and I hope there is a...
View Article[OR Ss4] Is there an Open Roads Corridor Equivalent to the "Automatic" Radius...
In the Corridor Modeler, there was a setting that made little fillets on a corridor of enabled. I do not have access to an earlier version and am doing this from memory, so its official name and it...
View ArticleRE: ConceptStation - Placing components on template error
Chris, Thanks for the response, however this did not solve my issue (I did the fit view trick about 30 times). For now, my workaround is to create the templates in a new project, and then import the...
View ArticleRE: SS4 error on open
Attach a file and I will see if there is something in the file that triggers the message. Other than that you could try deleting the folder under your user where all the prefs and geopak resource files...
View ArticleRE: Survey Chains
For Horizontal, you could just use the Microstation copy parallel command. For vertical, please see this videocommunities.bentley.com/.../26875.video-updown-link-code-demonstration
View ArticleSurvey Chains
In SS2 we were able to offset a survey chain horizontally and vertically how would I do this now in SS4 looks like that command does not exist any moreThanks
View ArticleRE: SS4 error on open
I reinstalled the FDOT workspace. Seems to have fixed the issue. Thanks for the reply!
View ArticleClik here to view.
SS4 error on open
I'm getting this error dialog when I open any SS4 dgn in any workspace......Any ideas?
View ArticleORD - Delivered Design standards
HiI am busy creating design standards for client specific organizations.I have started by evaluating the delivered AASHTO standards.1. Am i correct in saying that the table data in the "_OpenRoads...
View ArticleClik here to view.
RE: PowerCivil SS4 - Cicular Curve Between Elements (vertical)
In testing it seems to be a view window display issue rather than a true geometry problem. I can place a circular curve between two tangents. In the picture shown below the circular curve appears...
View ArticleORD Tentative popup not working
Just getting started with OpenRoads Designer and I cant seem to get the tentative popup menu to work. (it works in regular Connect tho)(In my case, I've mapped Ctrl+Tentative to "inputmanager menu...
View ArticleRE: Survey Chains
you could do this (TEMPLATE ALONG A PATH) with standard Microstation "Extrude profile along a path". You will find it in the 3d forms toolboxes, (not sure right out my head without microstation in front)
View ArticleRE: Survey Chains
This isn't easy in SS4. A word of warning about the TMPL coding. I was using it extensively. I stopped when I noticed it was not consistently being applied. Sometimes it would work and other times it...
View ArticleRE: Survey Chains
The way Civil 3D does its version of the TMPL code is different, requiring a master figure and offset values for the parallel figures. The plus side to this is that the offsets or horizontal and...
View ArticleRE: Element Annotation - Annotating a Horizontal Alignment
Can you attach geniou file of your project
View ArticleRE: Survey Chains
I too feel the pain that Chuck feels. In my opinion, OpenRoads has complicated the survey post-processing effort. Granted, I've been using InRoads Survey since its initial FieldWorks release, but the...
View ArticleClik here to view.
RE: Survey Chains
caddcop:I'm not an active Inroads user. I use OpenRoads with Geopak. I use the linking codes all the time between C3D and Geopak. In fact being able to adopt our land development side workflow and...
View ArticleRE: Survey Chains
Dan We use Trimble hardware for everything. We don't use TBC for anything except Static GPS. OpenRoads Geopak will digest several native Trimble file formats (JXL, JOB & DC). We have settled on the...
View Article