RE: [OR] Can the Excel/Element Template XML Utility developed for ORD be used...
Chuck we decided to draw the line where we did covering all the basics. Feel free to expand as you need.
View ArticleRE: Feature definition graphics in Geopak SS3 not showing in corrdiors
hi CADDCOP, Refreshing/reloading the feature definition dgnlib was actually the first thing I tried, sorry I didn't mention that in the previous posts. I have also tried changing the design stage, and...
View ArticleRE: Create 3D automatically by constant elevation
Hi Elise, Please go through the video in the link below. Hope this is what you are looking for. Do let me know.communities.bentley.com/.../15781.video-create-3d-automatically
View ArticleRE: Create 3D automatically by constant elevation
Thank you for your answer Amita, Actually what I wanted to know is : is it possible to automatically create the 3D geometry using another profile tool. In this video it creates a profile by best fit...
View ArticleCreate 3D automatically by constant elevation
Hello,In Open Roads, is there a way to create 3D automatically other than best fit profile, let's say a constant elevation for example ?I tried to play around in the cfg file but I am not sure if it is...
View ArticleUsing Microsoft Surface Book Pro - Performance Base Computer?
Hi,Has anyone got any experience using the new Microsoft Surface Book Pro - Performance Base 16gB computer with MX and / or Autocad?I am keen to buy one due to its size and portability however not sure...
View ArticleRE: Regarding export dwg
Hello Kannemadugu, Thank you for posting your question in Bentley Forum. Please refer below the link to get 2D lines after export to...
View ArticleRE: Regarding export dwg
Also can you please elaborate in more detail about the undulations as it comes smooth lines, if possible please share any snapshot of the same ? Regards, Purva Lakde
View ArticleClik here to view.
RE: Regarding export dwg
Dear Purva If you see in attached file carriageway,shoulder lines..etc are coming like this but I need those lines as smooth.
View ArticleRegarding export dwg
Any one can help to get lines in 2d after export to AutoCad and also I am not getting smooth lines it comes with undulations. Â Â
View ArticleRE: Element [xxxx] has been deleted
Has anyone found an answer or resolution to this issue????? Bentley Support does not know what is causing this problem and is not very helpful at all. I have found that if (through the cogo navigator)...
View ArticleRE: Element [xxxx] has been deleted
I do not believe the files were attached by the other user. So we can not investigate. Would you be able to attach your files or place them somewhere that we can access them. I looked for your Service...
View ArticleElement [xxxx] has been deleted
When opening a .dgn file in PowerGeoPak (v8.11.9.674) with no previous issues it starts a running prompt at the bottom "Element [xxxx] has been deleted". It continues to repeat and eventually locks up...
View ArticleRE: Non-Survey Terrain Element - Terrain State is invalid
Hi Caddcop, I have been able to add rules, deactivate rules and modify feature and then add rules again without any problems. Could you post your DGN (to the link below) and indicate a feature that you...
View ArticleRE: Non-Survey Terrain Element - Terrain State is invalid
File is uploaded. In the 3D model, I have placed a leadered note pointing at the terrain element with its name (top line) and its issues (remaining lines).
View ArticleRE: InRoads V8i SS2 - Updating a Design Surface and Cross Sections
I have not had this issue.In the dialog box (working from memory as I only have access to Ss4) you have to select the design surface, as long as the New Surface for Each Corridor is not checked. Also,...
View ArticleRE: Non-Survey Terrain Element - Terrain State is invalid
Thanks for posting your data. Try adjusting your Maximum Triangle Length, I reset from 40 to 10 and was able to export to DTM and verify my DTM features in InRoads Explorer.
View ArticleNon-Survey Terrain Element - Terrain State is invalid
I have a Site design that involved building a Terrain Element from a variety of Corridors and Linear Templates. I added the surface features from these as breaklines in case I needed to modify the DTM...
View ArticleRE: InRoads V8i SS2 - Updating a Design Surface and Cross Sections
Ben, first, your statement about creating the new corridor and expecting the cross sections to update ...is expecting too much from InRoads. You need to consider that things like Profiles and Cross...
View Article