RE: Transition problems
To answer your question: "Do all points need to be mapped?" That is up to your design intent. If you do not map the points, then they will begin/end abruptly at the start/end of the specified template....
View ArticleClik here to view.
Transition problems
Hi,I am trying to do a transition between 2 templates and my problem is that the cut is not done correctly along the transition. Also a small area has its feature definition changed. Also I don't...
View ArticleRE: Breaks are not recognized when extracting graphics and building triangles
I hope you have a backup or can undo the breaking of the chains. You have a survey project and you can create the dtm directly from survey.communities.bentley.com/.../4628.create-dtm-from-survey-data
View ArticleRE: Breaks are not recognized when extracting graphics and building triangles
Sorry, can you explain what you mean by that?
View ArticleRE: Breaks are not recognized when extracting graphics and building triangles
please watch this video.http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/4628.create-dtm-from-survey-data
View ArticleBreaks are not recognized when extracting graphics and building triangles
I am trying to append a .dat file to include breaks. I start in DTM>Extract>Graphics, and in the "Extract Graphics" window I use the following settings: File Type: Ascii, File Open: Append,...
View ArticleRE: [OR] Corridor reattach crash when autolocate is toggled on
Next time I encounter this, I'll try to remember to post it here.
View Article[OR] Corridor reattach crash when autolocate is toggled on
Using Geopak SS4 .878.I key in corridor reattach.I click the corridor to be reattached.I mouse over the alignment that replaces the current one.The status bar suggests that stuff is happening, like...
View Article[OR] Complex redefine and Append element
These tools are confusing and not doing what I expect them to do.I have a chain for a ditch's centerline. It has many elements in it. One of them is a variable offset from my roadway alignment followed...
View ArticleRE: Inroads Storm and sanitary: profile for inlets and manhole not drawn with...
Found the answer my self. You have to set the style you want used for the structure in profile to the "Point" field on the Styles tab of the drainage edit/review dialog. Doesn't make any sense but...
View ArticleInroads Storm and sanitary: profile for inlets and manhole not drawn with...
I'm trying to use styles and named symbologies to control the visualization of drainage profiles in Inroads Storm and Sanitary (SS2 8.11.7.615). I have my style lock turned on and pipes are symbolized...
View ArticleRE: [OR] Corridor reattach crash when autolocate is toggled on
I've uploaded it as 131547.zip. I have a feeling all you need to reproduce is my alignment, corridor, and the DWG. Or at least, if you can't reproduce it, you'll be able to see how the alignment is...
View ArticleRE: Breaks are not recognized when extracting graphics and building triangles
Hey Nico, I watched the video and followed all the steps, but this process is really no different than the one I have listed in my first post. Also, after following the steps in the video, my survey...
View ArticleRE: Issue with Corridor Clipping in InRoads SS4
If the dgn file works fine on your coworker's machine but not yours and you are both using the same workspace, then that does bring into suspicion the install of OpenRoads. Reimaging the machine might...
View ArticleIssue with Corridor Clipping in InRoads SS4
I am having an issue with corridor clipping on my machine. I have done everything I can think of to isolate the problem, but it appears to be something to do with my machine or my settings. I even...
View ArticleRE: Live classroom webinar Feb 13th - Ok for GEOPAK users?
Yes this class is for GEOPAK, InRoads, MXROAD, or PowerCivil SELECTseries 3 and SELECTseries 4. The Terrain and Geometry tools covered in this class are identical in all of these products.
View ArticleLive classroom webinar Feb 13th - Ok for GEOPAK users?
I would like to register for the "QuickStart for Terrain & Geometry Using OpenRoads Technology V8i (SELECTseries 3) - English" Live virtual classroom on Feb 13th. I am using Microstation SS4 and...
View ArticleClik here to view.
RE: Breaks are not recognized when extracting graphics and building triangles
ok. I found a defect on the early ss2 versions. Basically, you have to turn on the option to create the .dat file. If you do that, it should include the breaks. see capturethe steps from your first...
View ArticleRE: Breaks are not recognized when extracting graphics and building triangles
Nico, First, thank you so much for hanging in there with me for this whole thread. But unfortunately I've tried the "Create DAT File" box checked. I've also experimented with the Set Search > More...
View ArticleRE: Breaks are not recognized when extracting graphics and building triangles
Jeff, no problem. what version of geopak are you using? are the chains smd features set to be included in the dtm?communities.bentley.com/.../401552
View Article