Quantcast
Channel: OpenRoads | OpenSite Forum - Recent Threads
Viewing all articles
Browse latest Browse all 15087

Cross Section Sheet Definition Drawing - Reference Movement Affects Number of Cross Sections Placed per Sheet

$
0
0

Hello again all lol! Can't get through the day without a couple questions at least. 

So anyways, in the Cross Section Sheet Definitions, when I initially set up the file, I moved the drawing reference in the sheet model to a more centered position, the default placement being offset to the left (We have our stationing on both left and right sides of our cross sections, and the left side was being cut off). Also, I had previously setup these files and were able to get the maximum calculated cross sections per sheet. So after I recreated the setup more centered, now when I create new cross section sheets, there is only one cross section placed per sheet. it appears I can setup up the reference in the Sheet Definitions any where along a Y-axis and it will produce however many cross sections will fit, but any change in the X-axis apparently does something to the calculations, thus only allowing one cross section per sheet...

Any thoughts?


Viewing all articles
Browse latest Browse all 15087

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>