Hi Jervis,
this may be too late, but here's the method I'd be using for the task you have.
1) Attach the LiDAR data to an empty DGN file as PointClouds using the MicroStation PointCloud tools.
2) Open the DGN in GEOPAK (point clouds should still be visible).
3) Use the Terrain tools to build a "terrain" from the Point Clouds. You should set a MicroStation fence around the area of interest to limit the amount of data that is imported. Also, there are filtering options within the "create" tool to allow you to filter the point cloud information. Typically, I’d use the "TIN" filter option and set the filter value to whatever the expected accuracy of the point cloud. There is an option to test the filter which will tell you how many points will be extracted to the Terrain. If there's more than a couple of million, you might want to change the filter value OR make the fence smaller an develop a number of terrain objects.
4) Once you have the terrain objects created, they can be exported to GEOPAK TIN files for use with the other GEOPAK tools.
There are videos that show this process. The link that Nico provided will take you to those.
Unfortunately, when I tried to access the video's the links didn’t work - but that could be the IT rules here in the office causing that.
Give them a try.
HTHs,
Michael
this may be too late, but here's the method I'd be using for the task you have.
1) Attach the LiDAR data to an empty DGN file as PointClouds using the MicroStation PointCloud tools.
2) Open the DGN in GEOPAK (point clouds should still be visible).
3) Use the Terrain tools to build a "terrain" from the Point Clouds. You should set a MicroStation fence around the area of interest to limit the amount of data that is imported. Also, there are filtering options within the "create" tool to allow you to filter the point cloud information. Typically, I’d use the "TIN" filter option and set the filter value to whatever the expected accuracy of the point cloud. There is an option to test the filter which will tell you how many points will be extracted to the Terrain. If there's more than a couple of million, you might want to change the filter value OR make the fence smaller an develop a number of terrain objects.
4) Once you have the terrain objects created, they can be exported to GEOPAK TIN files for use with the other GEOPAK tools.
There are videos that show this process. The link that Nico provided will take you to those.
Unfortunately, when I tried to access the video's the links didn’t work - but that could be the IT rules here in the office causing that.
Give them a try.
HTHs,
Michael