RE: [OR] Creating permanent cross sections, duplicate stations not allowed

Instead of using just a simple range as provided in the main tab (whatever that's called) where you specify the alignment and the model name to be created, we are using custom section ranges and stuff.

What I suspect may be happening is this: Say I have an alignment whose custom range runs from 100+00 to 120+00. Selecting another alignment that begins at 220+00 will cause the processor to process each custom section but individually: The section at 100+00 becomes 220+00, then the section at 101+00 becomes 220+00, then the section at 102+00 becomes 220+00, and so on. This means I now have multiple sections at a single station.

However, as I noted, quite evidently this happens inconsistently.