Using OR SS4 .878, I'm seeing strange behavior on this template drop.
The annotations here show that the slope all the way to a bogus terrain model (just for testing purposes) is 1:6. I have confirmed that the point at the left end of the 14' dimension is GR-F-CLZ-L. And you can see the flat element at the bogus tie location. (Normally it's right on top of the tie point, but as you can see I'm having issues and want to simplify the process of testing.)
Instead, it should be 1:3 outside of the break, as you can see from the template:
Point GR-F-CLZ-L has no end condition properties toggled on. It is locked into position by slope from ES-L and offset from EP-L.
Point GR-F-TIE-L (toe point) has all end condition properties toggled on (except do not construct). It is locked into position by slope from GR-F-CLZ-L (33%) and vertical from ES-L (not that this fact should matter).
FYI, the Rock-L point is for testing as well, as a fallback to test end conditions.
I have two drops of this template: the one I'm having an issue with is in a fill condition; there's another that has a cut condition and that one appears to be fine.