Hi,
I am trying to generate interface as shown in pic. I was successful also . But at some locations the interface is messy.
I am using the following interface strategy. If anyone could point out the errors i will be thankful.
| 259,INTI |
| 260,MCA0,2=IAA0,4=-1.,5=,8= |
| 261,IGN,2=EVA0,3=IAD1,4=5.,5=0.5,7=0,10=0 |
| 261,IGN,2=IAD1,3=IAD2,4=5.,5=0.6,7=-1,10=-1 |
| 261,IGN,2=IAD2,3=IAD3,4=5.,5=0.5,7=0,10=0 |
| 261,IGN,2=IAD3,3=IAD4,4=5.,5=0.6,7=1,10=1 |
| 261,IGN,2=IAD4,3=IAD5,4=5.,5=0.5,7=0,10=0 |
| 261,TX00,2=IAD5,3=IAC1,4=5.,5=6,7=1,10=1 |
| 261,IGN,2=IAC1,3=IAC2,4=5.,5=2,7=-0.033,10=-0.033 |
| 261,TX00,2=IAC2,3=IAC3,4=5.,5=6,7=1,10=1 |
| 261,IGN,2=IAC3,3=IAC4,4=5.,5=2,7=-0.033,10=-0.033 |
| 261,IGN,2=IAC4,3=,4=5.,7=1,10=1 |
| 262,TX00,2=EVA0,3=IAF1,4=5.,5=12,7=-0.5,10=-0.5 |
| 262,IGN,2=IAF1,3=IAF2,4=5.,5=2,7=-0.033,10=-0.033 |
| 262,IGN,2=IAF2,3=IAF3,4=5.,5=1,7=-0.5,10=-0.5 |
| 262,TX00,2=IAF3,3=,4=5.,7=-999,10=-999 |
| 263,DISC |